HappyBottom Pool Pad
Easy To Install
HappyBottom Pool Pad can add years of life to a pool and its liner. Made from a special high density closed cell polyethylene foam, HappyBottom Pool Pad acts as a vapor barrier to keep potentially harmful water away from metal components and the pool liner. In addition, liner failure due to puncture is minimized and heat retention is improved. A smooth, easy to clean bottom and reduced indentations are just a few of the benefits of using HappyBottom Pool Pad.
HappyBottom Pool Pad is easy to install. First, roll out sections of pad and cut them one foot longer than the (biggest, if oval) dimension of the pool. Next, seam enough 4 ft. wide sections together with Sure Seam Tape to cover the (smaller if oval) dimension of the pool. Finally, flip pad over so tape is facing the ground and build the entire pool on top of the pad. Trim off excess pad material after pool has been filled. HappyBottom is available in standard 1/4" thickness and extra-thick 1/2".
NOTE: GEOTEXTILE pads DO NOT provide cushioning like HappyBottom does. Geotextile pads are flimsy, hard to install felt like products. They are not much thicker than a heavy piece of cloth. Because they come as one big sheet, they are hard to install. It is difficult to get a smooth, wrinkle free pool bottom when using a geotextile product. Geotextile products are porous and hold water much like a sponge does. This trapped water can promote black mold growth which may be visible through the pool liner. Use HappyBottom or our Perfect Pool Bottom instead.
(We do not recommend using HappyBottom® without Gladon Pool Cove.)
| Description | SKU # |
|---|---|
| 1/4" X 48" X 300' Roll | PP 300 |
| 1/4" X 48" X 150' Roll | PP 150 |
| 1/4" X 48" X 100' Roll | PP 100 |
| 1/2" X 48" X 150' Roll | PP 15050 |
![[Dividing Line Image]](images/div.gif){kind=small}
| Click on a link below | |||||||
 |
 |
 |
 |
 |
 |
 |
|